grml-zsh-config
is its name, and it’s always one of the first things I install on a fresh system. I’ll never understand why it isn’t the default.
grml-zsh-config
is its name, and it’s always one of the first things I install on a fresh system. I’ll never understand why it isn’t the default.
I would sell a few of them to shore up the budget, then use those funds to build a NAS box. You can buy everything other than drives for a few hundred, less if you have spare parts sitting around.
Exactly. Doesn’t matter if they’re wired or wifi, or where they are, as long as they’re on the same network you’re fine.
If you’re only trying to use Jellyfin at home, you don’t need any reverse proxy or domain. All you need is for both devices to be on the same network, and for the Raspberry Pi to have a fixed internal IP address (through your router settings).
On the Shield, you just give the Jellyfin app that IP address and port number (10.0.0.X:8096) to connect and you’re good to go.
For a NAS, you’re usually concerned with capacity first. And you can’t buy a 20TB m2.
Automating updates is generally frowned upon, that’s when things can break. But waiting to run updates until you feel like it (instead of daily) is totally fine. I’ve been using Arch and its forks for years, and have always updated once a week unless something was wrong.
It isn’t recommended, but dpkg will install it if you really want to. You just need to handle dependencies manually.
But it’s a pretty rare issue. If something isn’t available in the official repo, AUR probably has it.
If you’re comfortable, you’re fine. Anything more would just be to speed up the rebuild, so it’s less important if you don’t mind taking the time.
Eh, just hit it with the 777 and pray. Then swear at it some more.
Only because I don’t want to be mistaken for a policeman.
You got a remux, which is uncompressed. You can turn those off in Radarr to avoid those surprises.
If you want to fine-tune your file sizes (and quality) further, you can set up custom formats and quality profiles. The Trash Guides explain it well, the “HD Blu-ray + Web” profile on that page is a solid starting point. It’ll usually grab 6-12GB movies, but you can tweak it if you want them smaller.
They’re also surprisingly easy to upgrade for their size. Swapped RAM, CPU, and hard drive in about 15 minutes total on one of mine.
If it was me, I’d just go without parity temporarily and grab another drive for that when I could. A new system should be safe enough for a while, just not forever.
EndeavourOS is it. It’s basically a better version of archinstall, especially if you’re planning to install a DE.
I don’t know about an hourglass specifically, but there are some options. Should be in system settings, applications, launch feedback and/or busy cursor.
Arch or EndeavourOS, depending on the machine’s purpose and my mood at install time. I prefer rolling release, and pacman + AUR is a lovely combination.
And for a bit of extra clarity, they’re only changing the default DE. EndeavourOS gives you several DE options during install, KDE will just be on top of the list now (and used on the live media)
Yes, that’s how it’s supposedto work if they’re all on the same Docker network (same yaml). In practice, it can be flaky and you’re much better off using ip:port.
I’d call that a downgrade from CLI pacman and yay (AUR). They’re already simple to use.
You can get a USB IR receiver and use software like LIRC to map the inputs of basically any remote you have. Setting it up takes a little effort, but it works great when it’s done.