Easily doable in docker using the network_mode: "service:VPN_CONTAINER"
configuration (assuming your VPN is running as a container)
Easily doable in docker using the network_mode: "service:VPN_CONTAINER"
configuration (assuming your VPN is running as a container)
I’ve not used dockge so it may be great but at least for this case portainer puts all the stack (docker-compose) files on disk. It’s very easy to grab them if the app is unavailable.
I use a single Portainer service to manage 5 servers, 3 local and 2 VPS. I didn’t have to relearn anything beyond my management tool of choice (compose, swarm, k8s etc)
With a small amount of effort and the use of https://github.com/nanos/FediFetcher and https://github.com/g3rv4/GetMoarFediverse you can mitigate basically all those issues. It’s still not perfect by any means but it results in a perfectly usable single user instance.
The first populates the replies of the home timeline posts you see (as well as profiles of people it finds in those replies) and the second pulls down all the content from instances you select for your followed hashtags (choose mastodon.social and you can guarantee you’ll see most all posts with those tags)
Aside from everyone who’s using flutter?
IIRC your data would live on your chosen pod server - which does not have to be a fediverse instance.
Gonna go with… whoosh
If buying isn’t owning then piracy isn’t stealing.
There’s a couple of caveats with it, but I think neither are worse than your proposed flow.
Immich does support folders?
https://immich.app/docs/administration/storage-template/
With this you can store your photos in whatever structure you want.
I watched something very similar to this hit at least 40mph (~65kph) down my 30mph (~50kph) limit road the other day. The guy did not have a helmet on and was in a light jacket and jeans with trainers.
It was as you said, a motorcycle with pedals - only ridden by more of an idiot than the people who ride around during summer on 600cc bikes wearing shorts and t-shirts (cause at least they have a crash helmet on)
Yes.
Docker will have only exposed container ports if you told it to.
If you used -p 8080:80
(cli) or - 8080:80
(docker-compose) then docker will have dutifully NAT’d those ports through your firewall. You can either not do either of those if it’s a port you don’t want exposed or as @moonpiedumplings@programming.dev says below you can ensure it’s only mapped to localhost (or an otherwise non-public) IP.
Documentation people don’t read
Too bad people don’t read that advice
Sure, I get it, this stuff should be accessible for all. Easy to use with sane defaults and all that. But at the end of the day anyone wanting to using this stuff is exposing potential/actual vulnerabilites to the internet (via the OS, the software stack, the configuration, … ad nauseum), and the management and ultimate responsibility for that falls on their shoulders.
If they’re not doing the absolute minimum of R’ingTFM for something as complex as Docker then what else has been missed?
People expect, that, like most other services, docker binds to ports/addresses behind the firewall
Unless you tell it otherwise that’s exactly what it does. If you don’t bind ports good luck accessing your NAT’d 172.17.0.x:3001 service from the internet. Podman has the exact same functionality.
But… You literally have ports rules in there. Rules that expose ports.
You don’t get to grumble that docker is doing something when you’re telling it to do it
Dockers manipulation of nftables is pretty well defined in their documentation. If you dig deep everything is tagged and natted through to the docker internal networks.
As to the usage of the docker socket that is widely advised against unless you really know what you’re doing.
He only wins internet clout if you know who he is. I didn’t. He was just that guy in the meme.
Now he’s been named at least two people, who didn’t know of his existence, now know.
You’ve just Barbara Streisand’ this guy.
Is Yorkshire tea similarly fiddled with? Beats the pants off PG Tips as a general rule.
So to be clear, you want traffic coming out of your VPS to have a source address that is your home IP?
No that’s not how I read it at all. He wants his VPS to act as a NAT router for email that routes traffic through a wireguard tunnel to the mail server on his home network. His mail server would act as if it was port forwarded using his home router, only it won’t be his home IP, it’ll be the VPS’s
Flash drive hidden under the carpet and connected via a USB extension, holding the decryption keys - threat model is a robber making off with the hard drives and gear, where the data just needs to be useless or inaccessible to others.
This is a pretty clever solution. Most thieves won’t follow a cable that for all intents looks like a network cable, especially if it disappears into a wall plate or something.
If you’ve got a good network path NFS mounts work great. Don’t forget to also back up your compose files. Then bringing a machine back up is just a case of running them.
I’m reading this scratching my head going “If your unit tests need a database they ain’t a unit test”.