It’s kind of like how the 8086 was a 16 bit processor but could access 1 megabyte of ram (640k ram 384 k reserved for rom) . -Or the 286 which was 16 bit but could access 24 MB.
But even without that the Prescott P4’s supported 64 bits.
PAE was introduced with the Pentium Pro 30 years ago. I used it on Dell Pentium II servers that ran SQL Server. Even the 386 from 1985 could access 64 terabytes of ram using segmented mode.
While technically true, the P4 did support PAE, in reality you couldn’t really make use of it on consumer hardware for most of its lifetime. No ordinary socket 478 mainboard with DDR1 memory supported more than 4 GB of RAM. With socket 775 more RAM was possible, but that socket is “only” ~20 years old.
Besides that, there were other even newer systems that supported only 4 GB of RAM, like some Intel Atom mainboards with a single DDR2 socket. Same with Via C3 mainboards.
Then I don’t understand what your point is. A CPU on its own without a system isn’t of any use. Since there were no motherboards allowing you to use that much RAM, the point about the CPU supporting it is moot as far as I am concerned.
Imagine if I did a meme that blamed AMD for only supporting DDR4 because my motherboard only did DDR4 despite all AMD 7000 and newer supporting DDR4 or DDR5…
The Pentium 4 supported PAE and 36 bit PSE
https://en.m.wikipedia.org/wiki/Physical_Address_Extension
https://en.m.wikipedia.org/wiki/Physical_Address_Extension#%3A~%3Atext=This+article+needs+additional+citations%2Cmay+be+challenged+and+removed.&text=In+computing%2C+Physical+Address+Extension%2Cthe+operating+system+enables+PAE.
It’s kind of like how the 8086 was a 16 bit processor but could access 1 megabyte of ram (640k ram 384 k reserved for rom) . -Or the 286 which was 16 bit but could access 24 MB.
But even without that the Prescott P4’s supported 64 bits.
All of that was introduced in 2004. When you said “25 years ago” I assumed you meant the original P4 from 2000.
PAE was introduced with the Pentium Pro 30 years ago. I used it on Dell Pentium II servers that ran SQL Server. Even the 386 from 1985 could access 64 terabytes of ram using segmented mode.
Full 64 bit Prescott P4 was 2004.
While technically true, the P4 did support PAE, in reality you couldn’t really make use of it on consumer hardware for most of its lifetime. No ordinary socket 478 mainboard with DDR1 memory supported more than 4 GB of RAM. With socket 775 more RAM was possible, but that socket is “only” ~20 years old.
Besides that, there were other even newer systems that supported only 4 GB of RAM, like some Intel Atom mainboards with a single DDR2 socket. Same with Via C3 mainboards.
Oh sure. But as I said, that’s the motherboard’s fault, not the cpu.
Then I don’t understand what your point is. A CPU on its own without a system isn’t of any use. Since there were no motherboards allowing you to use that much RAM, the point about the CPU supporting it is moot as far as I am concerned.
Because the meme blames Intel.
Imagine if I did a meme that blamed AMD for only supporting DDR4 because my motherboard only did DDR4 despite all AMD 7000 and newer supporting DDR4 or DDR5…